1/4″X2-1/2″ 3FLUTE CARBIDE END MILL CC ALUSPEED COATED FOR ALUMINUM END MIL BITS

Available on backorder

SKU: ICB1120

$14.99

1/4 x 2-1/2″ 3FLUTE CARBIDE END MILL CC ALU SPEED COATED FOR ALUMINUM

Use: For universal use in different materials (aluminum alloy steel or same class preferred)

CC ALU SPEED coated 3times long life-time than the uncoated aluminum cutter

Tool Shank: h5 shank tolerance

Available on backorder

Qty
Compare
ORDER NO ICB1120 MATERIAL MIRCO-TUNGSTEN
CUTTING TYPE SQUARE END MILL CUTTING DIAMETER 1/4
NUMBER OF FLUTE3 3 FLUTE LENGTH 3/4
FINISHING COATE ACC ALUSPEED SHANK DIAMETER 1/4
HELIX ANGLE45 45 OVER LENGTH 2-1/2
SHAPE FLAT SIDE MILL SHANK TYPE ROUND
BRAND MADE IN TAIWAN CUTTING TYPE SINGLE END

1/4 x 2-1/2″ 3FLUTE CARBIDE END MILL CC ALU SPEED COATED FOR ALUMINUM

 

For universal use in different materials (aluminum alloy steel or same class preferred)

The sharpness of the knife can be maintained after coating

High toughness and high rigidity

Self-lubricating function: a low affinity for cold welding, cutting edge

The surface is extremely smooth, and the chip flutes can be removed without chips during milling and drilling

Excellent smoothness on the guide vane and excellent alignment of the machined holes

Very suitable for processing aluminum, copper, titanium alloys and ALSi alloys with a silicon content of less than 10% (for products with higher silicon content, we recommend using diamond coating)

 

Cutting Condition

DiameterVC(m/min)AP(mm)AE(mm)FEED (mm/min)RPM/MIN
1/81500.150.15200024000
3/162260.170.17250018000
1/43500.20.2280015000
3/84200.250.25300013000
1/24500.30.335008000

Tungsten Material Tungsten  (WC+Co) hard alloy (YG)


It has high toughness of flexural strength and good thermal conductivity, but has a poor heat resistance and wear resistance. It is mainly used for processing cast iron and non-ferrous metals. Fine-grained YG cemented carbide  (such as YG3X, YG6X), when the cobalt content is the same, its hardness and wear resistance are higher than  YG3 and YG6, and its strength and toughness are slightly worse. It is suitable for processing hard cast iron and austenitic stainless steel. , Heat-resistant alloy, hard bronze, etc.

Related Products

Order NoD1(MM)L1(mm)D(mm)L(mm)COATEDTOOTH
ICB11181/81/21/81-1/2ACC ALU3
ICB11193/165/83/162ACC ALU3
ICB11201/43/41/42-1/2ACC ALU3
ICB11213/813/82-1/2ACC ALU3
ICB11221/21-1/21/24ACC ALU3

 

Ionbond provides thin-film coating services and operates, includes PVD, PACVD, CVD, CVA, and CVI technologies,
including a broad range of DLC coatings. Please contact us for further information.
We look forward to serving you.

 

 

 

Material :AlSi1MgMn Vc=1200m/min(3936,96sf/min)
Cutter Diameter 3/8″ n=38200rev/min
Cutting Type: CNC Milling ft=0,084/t(0,0033″/t)
Cutting with coolant Result: no damage

Weight 1.5 lbs
Dimensions 15 × 45 × 65 in
Measurement system

Inch (in)

Sales Unit

single

Product Category

Square End Mill

Flute Number

3

Top